96104-1/P-5C
96104-1/P-5C
EMR Tower Top Receiver Multicouplers allow several receivers to share a common antenna while reducing line loss between the antenna and multicoupler. A preselector and amplifier are housed in a tower-mounted NEMA enclosure connected by cable to a power distribution panel at the base station. The power divider provides a minimum of 23 dB of port-to-port isolation, preventing signal mixing even at minimal channel separation.
Additional information
| Electrical | |
|---|---|
| Frequency Band | |
| Number of Channels | |
| Number of Resonators | |
| VSWR @ Resonance (Max.) | |
| Isolation Rx-Rx (Min.) | |
| System Voltage | |
| Passband Range | |
| System NF (Typ.) | |
| Amplifier Gain (Max.) | |
| Amplifier Noise Figure | |
| Amplifier IP3 | +49 dBm (w/o limiter) |
| Amplifier Current Draw | |
| Amplifier Type | |
| Amplifier Bypass on Failure | Stage 1, 2, Both |
| Amplifier Bias Voltage | |
| Amplifier Gain Adjust | |
| Impedance (Nom.) | |
| RF Connectors (I/O) | |
| Optional Upgrades | Stainless Steel Enclosure, Amplifier Bypass, Test Port (requires 2nd coaxial run up tower) |
| Mechanical | |
| Finish | |
| Rack Mount | |
| Tray Size (HxWxD) | |
| Ship Weight | 40 |
| Environmental | |
| Operating Temp. Range | |




